3.0.2 Engine front mounting plate

From G503Wiki

Jump to: navigation, search

Back to the Ford GPW Judging Standard Index Page!

3.0.2 Engine front mounting plate

The engine front mounting plate was changed sometime in early 1943* with the addition of a reinforcing plate on the generator side. This reinforcement was attached with three rivets near the timing chain cover.

*“Ordinance Dept. report” described in AAW VII states that change was made 1/16/43.

Updates to this info below this line

enter your info here...

Looking at several Front Plates, I think the CORRECT number of rivets for the reinforced LATE-style is FOUR, not the THREE as shown above.

Chuck Lutz

Retrieved from "http://wiki.g503.com/index.php/3.0.2_Engine_front_mounting_plate"
Personal tools